menu
Professsional Laser Cladding Service China Manufacturer
Wheel treads and rims

WILA uses laser cladding cobalt alloy coating to reduce the wear of heavy-duty wheel rim and rail side wear.

The specific method is: using a laser to cladding the cobalt alloy powder on the surface of the wheel rail; the weight percentage content of the cobalt alloy powder is: 1.1% C, 1.0% Si, 1.5% Fe, 28.5% Cr, 1.5% Ni, 4.4% W, the balance is Co. The heavy-duty wheel rail after WILA treatment has high wear resistance, low friction coefficient and long service life.

  • Railway wheel tread and rim repair
    Wheel tread and rim
    WILA uses the LDM2500-60 semiconductor all-solid-state laser and adopts the synchronous powder feeding iron-based alloy powder method to improve the surface of the high-speed train ER8 wheel by laser cladding to increase its wear resistance and hardness. The orthogonal test selects the relatively superior The process parameters. Using JSM-6360LA scanning electron microscope, Bruker D8ADVANCE X-ray diffractometer, XHV-1000Z digital microhardness tester, M-2000 friction and wear tester, the microstructure and performance of the alloy coating The bonding strength of its interface is tested. The results show that the optimal process parameters are P=1.6k W, v_s=400 mm/min, v_f=25 g/min. The hardness of the coating reaches 444 HV, which is 1.42 times that of the base ER8 steel. Compared with the base material, Its relative wear resistance is as high as 2.1.

A total of 1 pages

Stay informed by signing up for our mailing list

click here to leave a message

Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Home

Products

About

contact