Have any questions?
Get in touch-
Tel : +86 18355532477
-
Whatsapp : +8618355532477
-
Email : 247137166@qq.com
-
Skype : 247137166@qq.com
Have any questions?
Get in touchTel : +86 18355532477
Whatsapp : +8618355532477
Email : 247137166@qq.com
Skype : 247137166@qq.com
There is electrical corrosion in the bearing chamber of the end cover of the subway motor. In order to reduce welding distortion, WILA uses laser cladding to repair the bearing chamber of the end cover.
Payment:
TTShipping port:
ShanghaiLead Time:
20 days after receiving the deposit
Electric bus motor rotor end cover repair service
Product Description:
Name: Rotor end cover of electric bus motor
Material: cast iron/gray iron
Basic situation:
The long-term overload of the bus causes the motor to work overload. The motor locks instantly during the sudden braking process of the electric bus. The shaft and the end cover form a non-mechanical rotation and wear, and the end cover is electroplated.
Laser repair requirements:
1. The concentricity error of the end cover of the bearing chamber does not exceed 0.02mm in diameter
2.The cylindricity of the bearing chamber does not exceed 0.006mm.
3. Surface roughness Ra=1.6, end face chamfer C1.
4. After laser repair, there should be no pores, slag inclusions and unfused phenomenon.
click here to leave a message